Is It Time to Replace Your Evaporative Cooler Pads?

Making sure your evaporative cooler pads in Phoenix, AZ are changed frequently is the most effective way to ensure your swamp cooler operates efficiently. As these pads get filled up with deposits, they can degrade the operation of your swamp cooler and result in reduced cooling capacity.

Checking for buildup

When you have new evaporative cooler pads in Phoenix, AZ in your swamp cooler, they are able to absorb the most amount of water and provide the greatest amount of cooling for you. When water isn’t able to fully absorb into the pads because of mineral deposits from calcium and magnesium, it can impact airflow and cooling. This will make your cooling capacity go down and affect the efficiency of your swamp cooler.

When your cooling capacity is reduced, water begins to enter your airflow and can cause rusting and corrosion buildup on your evaporative cooler. While your swamp cooler will continue to run with this scale buildup, it is not allowing your swamp cooler to provide the maximum amount of cooling that it could. Changing your evaporative cooler pads in Phoenix, AZ will greatly increase the cold airflow from the unit.

Changing and cleaning evaporative cooler pads

Determining when to change your evaporative cooler pads in Phoenix, AZ is dependent on the water quality that is going into your swamp cooler, as well as how often you run it. An evaporative cooler that is run frequently with a poor water supply—one that has a lot of minerals and deposits in it—will require more frequent changing than a water supply that is filtered and not operated very often.

If you have good quality water (such as from a municipal water supply) and you have normal use of your swamp cooler, you should expect to change your evaporative cooler pads in Phoenix, AZ at the beginning of every season, as well as with regular maintenance of your unit. Hard water will require much more frequent changing of the evaporative cooler pads, as they will be built up with scale that will affect the airflow from the flutes of the pads.

Regardless of whether your evaporative cooler pads in Phoenix, AZ need changing, you should at least clean them every season, as this will help with the buildup of sediment that has formed on the pads. A good cleaning will remove the deposits on the pads and have your evaporative cooler working to the best extent possible. Also, if you see cracks in your evaporative cooler pads, this is an indication that they need to be changed.

Changing your evaporative cooler pads in Phoenix, AZ on a regular basis will allow your swamp cooler to operate at its highest efficiency and provide you with the greatest amount of cooling. To purchase new evaporative cooler pads, contact Premier Industries Inc. We have been producing a full array of evaporative coolers and air filtration systems for over 30 years, and also offer replacement evaporative cooler pads. Call us today to learn more about what we can offer.

Categorised in: Evaporative Cooling

This post was written by Mike Nicolini