Make the Most of Your Evaporative Coolers

You already know the amazing benefits of having evaporative coolers in Phoenix, AZ: the cost savings, the fresh air and the reduced environmental impact. But to make sure you are enjoying your evaporative cooler to the fullest, follow these tips for maximum cooling performance.

Adjust for balanced airflow

Evaporative coolers depend on balanced airflow. In other words, you need to make sure the amount of air pumped into your home and the amount flowing out are the same. To do this, you can either install ducts in each room of your house, or by simply opening the windows. If you choose to open the windows, you can determine whether the airflow is balanced by how forcefully the air from the window shuts the door to that room. If the door slams shut, open the window a bit more. But if the door doesn’t move at all, the window is open too much. When the door closes quietly, you’ve achieved the proper airflow balance.

Keep it cleaned and maintained

Make sure you have your evaporative coolers in Phoenix, AZ serviced at least twice a year. Much of the other maintenance you can do yourself. For example, perform monthly inspections to check for damaged and worn out parts. Check the pads to make sure they are still retaining moisture.

You should also clean your water pan regularly to prevent dirt, mold and bacteria from building up. If you plan on leaving for an extended period of time, empty all the water from your cooler to prevent creating a colony of bacteria to deal with when you return.

Use room temperature water

You may have heard of other evaporative cooler users putting ice water in their water tanks, with the assumption that this will increase their cooling capacity. It is true that you will feel an extra burst of cold air when standing in front of the unit, but that’s about as far as the benefits go. Evaporation requires water to heat up, therefore adding ice water only elongates the rate of evaporation. In fact, if the water is really cold, it might drip out of the cooling pad before it has a chance to evaporate. Instead, try using room temperature water to maximize evaporation and the cooling effect of your evaporative cooler.

Keep the wet pads wet and the water tank full

The damp pads provide moisture to evaporate into cool air. If the pads are not damp, there is nothing to evaporate. Check your water tank at least once a week to make sure there is enough water in it to keep the pads moist.

Monitor temperature

If your evaporative coolers in Phoenix, AZ don’t have built-in thermostats, you can easily find thermostats at your local hardware store. A thermostat is extremely helpful in maintaining a consistent temperature, and in making sure your cooler isn’t continuing to run after your home reaches the desired temperature.

Evaporative coolers in Phoenix, AZ are ideal for the arid climate and long, hot summers. But it’s important to know your unit well in order to fully reap the benefits. To learn more about maintaining and caring for your cooler, as well as maximizing its performance, contact Premier Industries Inc. today.

Categorised in: Evaporative Cooling

This post was written by Mike Nicolini