Premier Industries, Inc.

Stainless Steel HEATER COOLER UPGRADE PACKAGE

Add Evaporative Cooling to Heater or Ventilating Equipment

 

                                       WEATHERHOOD                                                  COOLER                                 TRANSITION TO HEATER    

EVAPORATIVE COOLING UPGRADE TO HEATER

(Unit shown depicts Stainless Steel Evaporative Cooler, Weatherhood and Transition to Heater)

 

The “Heater Cooler Upgrade Package” manufactured by Premier Industries, Inc., provides evaporative cooling to upgrade Direct and/or Indirect fired heaters and Ventilating Equipment. 

 

FEATURES:

            Housing:  Stainless Steel, grade 304 18g or 16g on larger units. Sized as specified.

            Cooling Media:  CELdekฎ or equal, 12” thick high efficiency media.

            Plumbing connections:   Stainless steel couplers welded to sump for drain, overflow and make up water accessible for easy external connections.

            Access Panel:  Lift off panel or hinged door as specified.

            Pump:  Close coupled or air capable standup type.

            Aluminum Face Louver Panel with birdscreen is standard.  Alternate Weatherhood is available

            Weatherhood:  Stainless Steel grade 304.

            Transition:  Stainless Steel grade 304 sized to mate with intake of heater.

           

ACCESSORIES:

            Typical accessories are:

            Dry filters:  2” thick throwaway type or washable filters or as specified.

            Birdscreen:  Aluminum perforated sheet or ฝ x ฝ wire or as specified.

            Drift (Moisture) Eliminators:  5-1/4” DRIFdekฎ or equal or as specified.

            Electrical Controls:  Pump controls externally mounted in generic enclosure.

            TDS (Total Dissolved Solids) Controller:  Available as specified.

            Thermal Controller:  To control pump operation to preset temperatures.

 

DESIGN TO ORDER ITEMS:  Contact Premier Industries, Inc. at 800-254-8989 or email premier@piec.com

 

Evaporative cooling Modules for some Reznor Model DFB Direct Fired Furnaces  

 

Heater

Evaporative Cooling Module Housing Size

 

 

Housing Model width x height

CFM Range

BTU Range

CFM Range

Wide  (inches)

High   (inches)

Deep   (inches)

With Transition

TBA

TBA

 

218

9,000 to

70,000 to

9 -  12,000

72

54

26

44

 

 

(72”W x 36”H)

20,000

2,000,000

13 - 17,000

72

72

26

62

 

 

 

 

 

18 - 20,000

72

84

26

74

 

 

 

 

 

 

 

 

 

 

 

 

221

10,000 to

100,000 to

10 – 17,000

100

54

26

36

 

 

(100” x 42”)

30,000

3,000,000

18 – 24,000

100

72

26

56

 

 

 

 

 

25 – 30,000

100

84

26

68

 

 

 

 

 

 

 

 

 

 

 

 

224

25,000 to

140,000 to

25 – 30,000

110

54

26

52

 

 

(110 x 55)

45,000

4,000,000

31 – 35,000

110

96

26

71

 

 

 

 

 

36 – 38,000

110

110

26

86

 

 

 

 

 

39 – 45,000

110

124

26

88

 

 

 

 

 

 

 

 

 

 

 

 

230

30,000 to

200,000 to

30 – 35,000

145

72

26

47

 

 

(145 x 60)

60,000

6,000,000

36 – 40,000

145

84

26

66

 

 

 

 

 

41 – 45,000

145

96

26

62

 

 

 

 

 

46 – 50,000

145

108

26

74

 

 

 

 

 

51 – 60,000

145

124

26

95

 

 

 

 

 

 

 

 

 

 

 

 

233

 

 

 

 

 

 

 

 

 

(160 x 72)

40,000 to

300,000 to

40 – 45,000

160

84

26

60

 

 

 

75,000

8,000,000

46 – 50.000

160

96

26

68

 

 

 

 

 

51 – 55,000

160

108

26

62

 

 

 

 

 

56 – 65,000

160

124

26

80

 

 

 

 

 

66 – 70,000

160

132

26

86

 

 

 

 

 

 

 

 

 

 

 

 

236

50,000 to

300,000 to

50 – 60,000

180

96

26

68

 

 

(180 x 72)

85.000

9,000,000

61 – 75,000

180

124

26

80

 

 

 

 

 

76 – 85,000

180

132

26

86

 

 

Note:  Above data is based on best available information.  Evaporative Cooling Modules data subject to change without prior notice.  Custom sizes on inquiry.

 

 

Evaporative cooling Modules for some Greenheck Model TSU Housing 40 and 50 Direct Fired Furnaces

 

Heater

Evaporative Cooling Module Housing size

 

 

Housing Model width x height

CFM Range

BTU Range

CFM Range

Wide  (inches)

High   (inches)

Deep   (inches)

With Transition

TBA

TBA

 

40

14,000 to

To

14 – 18,000

110

60

26

41

 

 

(216 & 220)

28,000

3,000,000

19 – 22,000

110

74

26

65

 

 

(110 x 51)

 

 

23 – 28,000

110

84

26

59

 

 

 

 

 

 

 

 

 

 

 

 

50

32,000 to

To

 

 

 

 

 

 

 

(225 & 230)

60,000

6,060,000

32 – 38,000

156

84

26

62

 

 

(156 x 64)

 

 

39 – 45,000

156

96

26

83

 

 

 

 

 

46 – 50,000

156

96

26

59

 

 

 

 

 

51 – 60,000

156

120

26

83

 

 

Note:  Above data is based on best available information.  Evaporative Cooling Modules data subject to change without prior notice.  Custom sizes on inquiry.

 

 

Evaporative cooling Modules for some Weather-Rite  Make-up air units
 

PREMIER ECM

CFM

CABINET DIMENSIONS (IN)

TRANSITION

MEDIA

NOTES

MODEL

MIN

MAX

WIDE

HIGH

DEEP

SUMP

RECOMMENDED

DEPTH

 

PECM-20

1000

3999

40

36

20

4

YES

12”

A transition is recommended to maintain the designed air velocity across the entire face area of the cooling media. This is necessary in order to meet the performance demands specified and preclude the problem of water entrainment in the air stream due to uneven and excessively high velocities.  Preferred angle of the transition should not be less than 60 degrees if space permits.

PECM-50

4000

5999

40

48

20

4

YES

12”

PECM-70

6000

7999

72

40

20

4

YES

12”

PECM-100

8000

11999

72

54

20

4

YES

12”

PECM-135

12000

15999

72

66

20

4

YES

12”

PECM-175

16000

19999

100

60

20

8

YES

12”

PECM-225

20000

24999

120

60

20

8

YES

12”

PECM-275

25000

29999

132

68

20

8

YES

12”

PECM-350

30000

39999

145

84

20

8

YES

12”

PECM-500

40000

60000

180

102

20

8

YES

12”

Note:  The above data is based on best available information and is subject to change without prior notice. 

The Cabinet sizes shown are selected for a recommended maximum face velocity at the highest CFM volume listed. 

Contact Premier Industries, Inc. 800-254-8989 or email premier@piec.com for custom size inquiries or additional information.